What are the technical requirements and suitable locations for using frequency conversion control cabinets?

外觀和結構。工業機器人要求布局合理操作方便造型美觀便于維修;無漏油漏氣現象;潤滑冷卻情況良好;機構動動應靈活平穩可靠。

Appearance and structure. Industrial robots require a reasonable layout, convenient operation, beautiful appearance, and easy maintenance; No oil or gas leakage; Good lubrication and cooling conditions; The movement of the mechanism should be flexible, stable, and reliable.

信號線應采用屏蔽雙絞等抗干擾技術;運動中突然停電后，2.電氣設備。動力線與信號線盡可能分開遠離?；謴?fù)供電時不得自行接通;非接地處的絕緣電阻不得小于5MΩ;電子元器件一般應進行老化處置;變頻控制柜應具有良好的通風散熱措施;電源電壓動搖允許±10%頻率允許50±1HZ。

The signal line should adopt anti-interference technologies such as shielded twisted pair; After a sudden power outage during exercise, 2. Electrical equipment. The power line and signal line should be separated as far as possible. It is not allowed to connect on its own when restoring power supply; The insulation resistance at non grounded locations shall not be less than 5M Ω; Electronic components should generally undergo aging treatment; The frequency conversion control cabinet should have good ventilation and heat dissipation measures; The power supply voltage is allowed to fluctuate by ± 10%, and the frequency is allowed to be 50 ± 1HZ.

可靠性。采用平均無故障工作時間(MTBF及可維修時間(MTP作為衡量可靠性的指標。

Reliability. Mean time between failures (MTBF) and repairable time (MTP) are used as indicators to measure reliability.

平安性。平安性要求應滿足《工業機器人平安規范》GB1129189規定。

Safety. The safety requirements should meet the provisions of the "Safety Specification for Industrial Robots" GB1129189.

變頻柜主要適用場所

Main applicable places for frequency conversion cabinets

城鄉居民生活小區供水系統。

Water supply system for urban and rural residential areas.

高層建筑供水，賓館飯店室內外供水。

Water supply for high-rise buildings, indoor and outdoor water supply for hotels and restaurants.

自來水廠供水站增壓系統。

The pressurization system of the water supply station in the waterworks.

深井潛水泵供水系統農村自建自來水系統。

The deep well submersible pump water supply system is a rural self built tap water system.

舊有供水系統(氣壓水塔高位水箱)改造。

Renovation of the old water supply system (high-pressure water tower high-level water tank).

供熱和空調系統中循環用水系統。

Circulating water system in heating and air conditioning systems.

工業恒壓供水系統工業鍋爐補水系統。

Industrial constant pressure water supply system Industrial boiler make-up water system.

高層樓供水壓力不足的調節改造系統。

The regulation and renovation system for insufficient water supply pressure in high-rise buildings.

各種飲料生產線的配水系統。變頻器廣泛應用于機床電機配套。

Water distribution systems for various beverage production lines. Frequency converters are widely used in machine tool motor matching.

本文由濟南機箱機柜提供技術支持，更多的詳細精彩內容請點擊我們的網站  http://m.kisansushi.com ，我們將會全心全意為您提供滿意的服務。

This article is supported by Jinan chassis and cabinets. For more detailed and exciting content, please click on our website http://m.kisansushi.com We will wholeheartedly provide you with satisfactory service.